Business Wi-Fi in Skelmersdale
Estates, and estates are what we are set up for. Pimbo, Gillibrands and Stanley, where the telecoms was fitted once and never revisited.
On the ground in Skelmersdale
Coverage inside a large steel-framed unit is a design problem, and it is what we get called about most here.
Across Pimbo, Gillibrands and Stanley, the units combine steel frames, clad walls, high ceilings and aisles of racking. Coverage that works in an empty building disappears once it is full of stock, and handheld scanners drop their session mid-aisle as they hand over between access points.
That needs surveying with the racking and stock where they actually are, designing for devices in motion rather than static coverage, and cabling to each access point properly rather than chaining extenders.
The yard and loading bays get forgotten more often than anything else, then somebody needs to scan out there.
Sound familiar?
These are the problems we fix for Skelmersdale businesses, and almost none of them are solved by buying a bigger package.
Brick, steel frames, thick masonry and the odd bit of foil-backed insulation. Most buildings absorb signal in ways a floorplan never reveals.
Access points get planned around where people sit, then everyone spends the day in the breakout area, the meeting room or the kitchen, where nobody put one.
A single consumer router in the corner was never going to cover the place, and adding a second on the same channel makes it worse rather than better.
Customer devices sitting on the same network as your tills, your files and your card terminals, with one password everybody in the building knows.
Consumer kit gives you a flashing light and a guess. Without a controller showing every access point and device, diagnosing a fault is guesswork.
The problems that matter appear under load, which is exactly when nobody has time to investigate them.
Why Synergy Max
What we do
The survey is the part that matters. Everything after it is installation.
Common questions
Easy to establish, and worth doing before you spend anything. Run a speed test on a device plugged into the router with a cable, then the same test on Wi-Fi at the far end of the building. If the wired figure is good and the wireless one is not, your broadband is fine and the network is the problem.
It depends on the building far more than the floor area, which is why anybody quoting from square footage alone is guessing. A masonry or steel-framed building can need several times what an equivalent modern open plan office needs. That is what the survey establishes.
Yes, and you should. VLANs put guests on a completely separate logical network so they cannot see your files, your cameras or your payment systems. PPSK means different groups get their own keys, so revoking one does not mean changing the password for everybody.
We monitor it, which means more often than not we see a problem before you report one. You also get one controller showing every access point and every connected device, so when something does go wrong it gets diagnosed rather than guessed at and rebooted.
You can, and for a venue it is one of the most useful things the Wi-Fi does, but it has to be opt-in. Under UK GDPR and PECR you need consent before sending marketing, the sign-in page has to make clear what somebody is agreeing to, and every message needs a working unsubscribe. We build the portal that way.
The rest of what we look after for businesses across Skelmersdale.
Ask us
Send this and a real person will reply. No call centre, no obligation, and we will tell you honestly if we are not the right fit.
Tell us where the Wi-Fi drops out and what the building is like when it is busy. We will survey it, design coverage around how you actually use the space, and install something that works.
