Business telecoms, done properly · broadband, phone systems, mobile & Wi-Fi

Business Wi-Fi in Bolton

Business Wi-Fi in Bolton.

The subdivided mills here throw up the most awkward cabling we see anywhere, and Logistics North sits at the other extreme entirely.

Surveyed first · not guessed atUniFi certified · and TP-LinkLocal engineers · forty-five minutes via the M6 and M61

Sound familiar?

Why the Wi-Fi does not reach.

These are the problems we fix for Bolton businesses, and almost none of them are solved by buying a bigger package.

The building is fighting you

Brick, steel frames, thick masonry and the odd bit of foil-backed insulation. Most buildings absorb signal in ways a floorplan never reveals.

Coverage followed the desks

Access points get planned around where people sit, then everyone spends the day in the breakout area, the meeting room or the kitchen, where nobody put one.

One router for the whole building

A single consumer router in the corner was never going to cover the place, and adding a second on the same channel makes it worse rather than better.

Guests share the business network

Customer devices sitting on the same network as your tills, your files and your card terminals, with one password everybody in the building knows.

Nobody can see what is wrong

Consumer kit gives you a flashing light and a guess. Without a controller showing every access point and device, diagnosing a fault is guesswork.

It only fails when you are busy

The problems that matter appear under load, which is exactly when nobody has time to investigate them.

What we do

How we design a network that works.

The survey is the part that matters. Everything after it is installation.

  • Survey the building as it actually is, loaded and in use rather than empty
  • Design coverage around how the space is genuinely used, not where the desks are
  • Cable properly to each access point rather than daisy-chaining extenders
  • Separate guests, staff, cameras and business systems onto their own networks with VLANs
  • Use PPSK so different groups get their own keys instead of one shared password
  • Monitor it afterwards, so more often than not we spot a problem before you report it

On the ground in Bolton

What matters here, and why.

The mills are the reason people call us, and they are genuinely difficult buildings.

A subdivided mill combines thick stone, exposed steel, high ceilings and internal partitions that were added long after the building was designed. Signal behaves unpredictably, and a plan drawn from a floorplan will be wrong. It needs surveying in the building, and the cabling between access points needs routing properly rather than run at a day rate.

Logistics North is the opposite problem at the opposite scale: coverage across a very large floor, the mezzanines and the yard, with roaming that holds up for handheld devices moving through racking.

Both need guests and contractors kept off the business network, which a flat network with one password cannot do.

Talk to a local engineer

A Ubiquiti UniFi access point mounted on a ceiling

Common questions

Business Wi-Fi in Bolton, answered.

Easy to establish, and worth doing before you spend anything. Run a speed test on a device plugged into the router with a cable, then the same test on Wi-Fi at the far end of the building. If the wired figure is good and the wireless one is not, your broadband is fine and the network is the problem.

It depends on the building far more than the floor area, which is why anybody quoting from square footage alone is guessing. A masonry or steel-framed building can need several times what an equivalent modern open plan office needs. That is what the survey establishes.

Yes, and you should. VLANs put guests on a completely separate logical network so they cannot see your files, your cameras or your payment systems. PPSK means different groups get their own keys, so revoking one does not mean changing the password for everybody.

We monitor it, which means more often than not we see a problem before you report one. You also get one controller showing every access point and every connected device, so when something does go wrong it gets diagnosed rather than guessed at and rebooted.

You can, and for a venue it is one of the most useful things the Wi-Fi does, but it has to be opt-in. Under UK GDPR and PECR you need consent before sending marketing, the sign-in page has to make clear what somebody is agreeing to, and every message needs a working unsubscribe. We build the portal that way.

Ask us

Tell us what you need, in Bolton.

Send this and a real person will reply. No call centre, no obligation, and we will tell you honestly if we are not the right fit.

Or call 0151 230 3949. We handle your details per our privacy policy.

Let us survey the building.

Tell us where the Wi-Fi drops out and what the building is like when it is busy. We will survey it, design coverage around how you actually use the space, and install something that works.